Maintenance and Cleaning
40 818 36 55-00/3
4. Defrost the freezer compartment (see section: "Defrosting").
5. Clean the inside and accessories with warm water and bicarbonate of
soda (5 ml to 0.5 litre of water).
3
The bottom shelf, which divides the fridge zone from the
LONGFRESH 0 °C cold zone, can be removed for cleaning. To do this,
pull the shelf straight out.
The cover over the bottom drawer can be removed for cleaning
purposes. After cleaning, it must be returned to the previous position so
that the function of the LONGFRESH 0 °C cold section can be retained.
6. Rinse and dry thoroughly.
7. Regularly check the door seals and wipe clean to ensure they are clean
and free from debris.
External Cleaning
1
Warning!
• There are sharp edges on the underside of the product so care should
be taken when cleaning.
• Do not use abrasive products
0 1. Wash the outer cabinet with warm soapy water.
2. Rinse and dry thoroughly.
1 Important: Do not use cleaning agents for stainless steel or other
aggressive or abrasive cleaning agents. The protective coat of lacquer
on the stainless steel surface can be damaged by these.
The coat of lacquer protects against finger prints and therefore
additional cleaning agents and maintenance products are no longer
required.
2
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the
appliance once a year with a soft brush or a vacuum cleaner.
3. After everything is dry place appliance back into service.