Filter
Top Products
29Operating the appliance
Operating the appliance
3 Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
3 After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Setting the heat setting
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any
time in order to prevent the settings being changed e.g. by wiping over the panel with a
cloth.
3 When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm
mode then back to the heat setting they were at before.
3 STOP+GO does not stop timer functions.
3 STOP+GO controls the entire control panel apart from the sensor field .
Control panel Display Pilot light
Switch on Touch for 2 seconds / lights up
Switch off Touch for 1 second / none goes out
Control bar Display
To set the heat set-
ting
Touch the desired heat setting, if neces-
sary, correct to the left or the right
to /
To switch off Touch 0
Control panel Display
Switch on Touch (for 4 seconds)
Switch off Touch previously set heat setting
Control panel Display
To switch on Touch
To switch off Touch Previous heat setting (not automatic
warm-up or power function)