Filter
Top Products
Operating Instructions
22
Countdown
The countdown operates independently and can therefore be set when
the oven is switched on as well as switched off.
Setting the Countdown
0 1. Press the “CLOCK” C button.
2. Set the time required within
5 seconds using the + and -
buttons.
When the time set on the count-
down has expired, an acoustic
signal sounds for approx. two
minutes.
3. Press the “CLOCK” C button to
switch off the signal.
Changing the Setting on the Countdown
0 1. Using the “CLOCK” C button, re-select the time set on the countdown.
2. Set the new time required within 5 seconds using the + or - buttons.
Switching Off the Countdown Early
0 1. Using the “CLOCK” C button, re-select the time set on the countdown.
2. Within 5 seconds set the time required to "0" using the - button.
Checking the Countdown Setting
A few seconds after the countdown has been set, the time display indi-
cates the current time again. You can check the amount of time left on
the countdown at any time.
0 1. Using the “CLOCK” C button, re-select the time set on the countdown.
The time remaining on the countdown is displayed.
Changing the Signal Tone
The frequency of the signal tone can be set to 3 different tones.
0 1. Press the - button until the changed signal tone sounds and release.
The frequency is set to the next level.
2. Press the - button again until the changed signal tone sounds and
release.
The frequency is set to the next level.