Filter
Top Products
2. Touch again and again until the dis-
play shows
.
flashes in the display.
3. Use
or to set minutes for DURA-
TION.
4. Touch
to confirm
5. Use
or to set hours for DURATION.
If you touch or during setting hours for DURATION, the appliance goes to setting
of the END function.
6. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
Touch any sensor field or open the oven door to stop an acoustic signal.
7. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven function and temperature.
2. Touch
again and again until the display shows .
flashes in the display.
3. Use
or to set END (first you set minutes and then hours) and or to
confirm.
4. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
5. Touch any sensor field or open the oven door to stop an acoustic signal.
6. Deactivate the appliance.
Setting the SET+GO
To start of the appliance with necessary settings with only one touch of the sensor field,
any time later.
1. Set an oven function (or programme) and temperature (refer to "Setting the oven
function" and "Changing the oven temperature").
2. Set DURATION (refer to "Setting the DURATION").
3. Touch
again and again until will flash in the display.
4. Touch
to set the SET+GO function.
The display shows
and with a dot. This dot shows which clock function is activated.
5. Touch any sensor field (apart from ON/OFF) to start the SET+GO function.
You can use SET+GO function only if DURATION is set.
Check result (selected models only)
If you set END or DURATION function, 2 minutes before end of cooking an acoustic sig-
nal sounds and lamp activates. The appliance goes to the setting of the END or DURA-
16
Clock functions