Filter
Top Products
•
Deactivating the my favourite programme function: Touch
.
When the my favourite programme function operates, you can change the time and tem-
perature.
USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chapter.
Core Temperature Sensor
The core temperature sensor measures the core temperature of the meat. When the
meat is at the set temperature, the appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table for roasting in the recipe book.
• The core temperature: refer to the table for the core temperature sensor in the recipe
book.
Only use the core temperature sensor supplied or original replacement parts.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with the symbol
on the han-
dle) into the centre of the meat.
3. Put the plug of the core temperature sen-
sor into the socket at the front of the ap-
pliance.
The display shows a flashing symbol
and the default set core temperature.
The temperature is 60 °C during the first
use, and the last set value during each
subsequent use.
4. Touch
or to set the core temper-
ature.
5. Touch
or the settings save automat-
ically after 5 seconds.
You can set the core temperature only when the symbol flashes. If the display shows
a static symbol
before you set the core temperature, use and or to set a
new value.
6. Set the oven function and, if necessary, the oven temperature.
The display shows the current core temperature and
(which shows the relation
between the set oven temperature and the current oven temperature).
The core temperature sensor must stay in the meat and in the socket during the cooking.
Using the accessories
19