Filter
Top Products
You have to set:
• The oven temperature
• The core temperature
Use only original parts. It ensures the best cooking result.
Using the core temperature sensor:
1. Put the tip of the core temperature sensor into the centre of the meat.
2. Activate the appliance.
3. Put the plug of the core temperature sensor into the socket on the right-upper side of
the cavity front.
The display shows core temperature sensor.
4. Use shuttle in less than 5 seconds to set the core temperature.
5. Set the oven function and, if necessary, the oven temperature.
The appliance calculates an approximate end time. An end time is different for the dif-
ferent quantities of the food, the set oven temperatures (minimum 120°C) and the op-
erating modes. The appliance calculates the end time in approximately 30 minutes.
The core temperature sensor must stay in the meat and in the socket during the cooking
process.
6. When the meat reaches set core temperature, an acoustic signal sounds. The appliance
switches off automatically.
Use any key to stop the signal.
7. Remove the core temperature sensor plug from the socket and remove the meat from
the oven.
To change the core temperature press .
WARNING!
The core temperature sensor is hot! There is the risk of burns! Be careful when you remove
the tip and plug of the core temperature sensor.
Inserting the Oven Accessories
The deep pan and the wire shelf have side edges.
These edges and the shape of the guide-bars cau-
ses the anti-tilt safety for the oven accessories.
Using the accessories 19