Filter
Top Products
3. Activate Steam Cleaning in the main menu. The process duration is shown in the dis-
play.
4. An acoustic signal sounds when the programme has finished. Press any button to
switch the signal off.
5. Wipe out the oven with a soft cloth. Remove any residual water from the steam gener-
ator.
6. Leave the appliance door open for around 1 hour to completely dry the oven.
Shelf support
You can remove the shelf support to clean the side walls.
Removing the shelf support
1. Carefully pull the support up and out of
the front catch.
2. Lightly move the support on the front
catch inwards.
3. Pull the support out of the rear catch.
Installing the shelf support
Install the shelf support in the opposite sequence.
Care and cleaning 23