AEG BS9304001 Oven User Manual


 
Care and cleaning
Before maintenance, switch off the appliance and disconnect the appliance from the
power supply.
Before maintenance, make sure that the appliance is cold. There is the risk of burns.
There is the risk that the glass panels can break.
Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a
fire.
Regular cleaning prevents the surface material from deteriorating
Use a deep baking tray for very moist cakes to prevent that fruit juices cause stains that
can be permanent.
For your personal safety and the safety of your property, only clean the appliance with
water and a soap. Do not use flammable products or products that can cause corrosion.
Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects,
abrasive cleaning agents, abrasive sponges and stain removers
If you use an oven spray, follow the instructions from the manufacturer.
Do not clean the glass door with abrasive cleaning agents or metal scraper. Heat resist-
ant surface of the inner glass can break and shatter.
When the door glass panels are damaged they become weak and can break. You must
replace them. Contact the service centre.
Be careful when you remove the door from the appliance. The door is heavy!
Do not clean catalytic enamel (if applicable).
Risk of fire
Open the door carefully. The use of ingredients with alcohol can cause a mixture of alco-
hol and air. There is the risk of fire.
Do not let sparks or open flames come near the appliance when you open the door.
Do not put flammable products or items that are wet with flammable products, and/or
fusible objects (made of plastic or aluminium) in, near or on the appliance.
Steam cooking
Do not open the oven door during Steam cooking. Steam can release. There is the risk of
skin burns. There is the risk that steam causes moisture damage to units.
Oven lamp
Bulb lamps used in this appliance are special lamps selected for household appliances use
only. They cannot be used for the full or partial illumination of a household room.
If it becomes necessary to replace the lamp use one of the same power and specifically
designed for household appliances only.
Disconnect the appliance from the power supply before the replacement of the oven
lamp. There is the risk of electrical shock.
Service centre
Only an approved engineer can repair or work on the appliance. Contact an approved
service centre.
6 Safety information