Aga Ranges F107411-01 Range User Manual


 
18
SERVICING  WARNING
Disconnect from electricity before servicing. Check appliance is safe when you have finished.
12. To Remove a Thermostat
Lift up the cooktop - see 4. Remove the control panel - see 8 Remove the oven shelves.
Undo the range rear cover screws and lift covers clear.
Right Hand oven
From inside the oven remove the two fi xings that secure
the thermostat phial cover. Push the thermostat sensing
bulb back to free it from the clips in the oven back panel.
Feed the thermostat capillary out of and clear of the
oven noting the routing.
Disconnect wiring from thermostat – make a note of the
wire colors and terminal connections - and undo the
two screws which secure the control to the mounting
plate. Refer to the wiring schematic.
The thermostat is clipped onto the front switch. Pull the
thermostat away from the front switch.
Fit the replacement and re-assemble in reverse order.
Check that the wiring is correct as shown in the wiring
schematic.
Ensure that the phial is clipped to the oven rear,
positioned centrally between the clips.
Check that the thermostat functions correctly.
Left Hand Multifunction oven
From inside the oven remove the two screws holding the
thermostat phial to the oven fan cover at the rear of the
oven.
Feed the thermostat capillary out of and clear of the oven
noting the routing.
Disconnect wiring from thermostat – make a note of the
wire colors and terminal connections - and undo the two
screws which secure the control to the mounting plate.
Refer to the wiring schematic.
Fit the replacement and re-assemble in reverse order.
Check that the wiring is correct as shown in the wiring
schematic.
Ensure that the phial is clipped to the oven rear,
positioned centrally between the clips.
Check that the thermostat functions correctly