OPERATING INSTRUCTIONS
18
DELTA-T CORE TEMPERATURE COOKING MODE
This special program function cooks by internal product
temperature with the use of the probe. Unlike the
standard core temperature mode however, the Delta-T
oven temperature automatically increases in direct
proportion to the internal temperature of the product.
The Delta-T mode can be used with both convection
and combination modes, providing a more gentle method
of cooking. Browning occurs toward the end of the
cooking cycle.
PRESS THE ON BUTTON TO POWER OVEN ON.
INTO PRODUCT.
The probe must be inserted so that the tip is positioned
in the center of the food mass. For liquid or semi-liquid
foods, suspend the probe in the center of the product and
secure the probe wire to the edge of the container.
PRESS T.
The last set values or oven control default setting for
temperature and time will appear in the display.
TOUCH THE PROBE ICON.
The previously set core temperature or default setting
will appear highlighted within the oven display. Touch
the displayed core temperature. The internal product core
temperature will appear at the top of the temperature
selection window. Type in desired internal product
core temperature or use up and down arrows to adjust
key
PRESS THE DELTA-T ICON THAT APPEARS
IN THE LOWER LEFT CORNER OF THE
TOUCH SCREEN.
PRESS THE GREEN START ARROW ICON TO
BEGIN COOKING.
next to the icon during operation. To change the set
value for core temperature, press the temperature next
to the icon and make changes as required.
DURING COOKING. Each push of the icon will
release one pulse of steam.
When the operator-set internal temperature has been
reached, a buzzer will sound indicating the end of the
operating mode.
or open
the oven door.
PRESS RED STOP ICON.