Filter
Top Products
The fryer must be supplied with a connector that
complies with all state and local installation codes.
Any appliance that is not furnished with a power
supply cord but that includes a set of casters must be
tethered. Adequate means must be provided to limit
the movement of this appliance without depending
on or transmitting stress to the electrical conduit.
The following requirements apply:
1. Casters must be a maximum height of 4-inches (102mm).
2.
Such mobile appliances must be installed with
the use of a flexible connector secured to the
building structure.
A mounting connector for a restraining device is
located on the lower back flange of the appliance
chassis, approximately 7-inches (178mm) from the
floor. A flexible connector is not supplied by nor is it
available from the factory.
R E S T R A I N T R E Q U I R E M E N T S - M O B I L E E Q U I P M E N T
W A R N I N G
RISK OF ELECTRIC SHOCK.
Appliance must be secured
to building structure.
I N S T A L L A T I O N
Gas Fryer Operation & Care Manual • 10