Alto-Shaam QC2-100 Freezer User Manual


 
QUICKCHILLER • INSTALLATION/OPERATION/SERVICE MANUAL • 22.
ADVANCED OPERATION – USER SETTINGS
OPERATION
13. DRIP TIME (MINUTES)
This is the amount of time the drain heater will run
after a hot-gas defrost function before automatically
switching back to the chilling mode. Factory default
setting is 10 minutes. The user may select a range
from 5-15 minutes using the right4or left3arrow
key to increase or decrease the numbers as required.
14. FACTORY SETTINGS
Resets all presets and user-defined settings to
factory default settings. 


