Filter
Top Products
5
Electrical Connection
WARNING
!
To avoid risk of personal injury or electrical shock, do not
ground through neutral wire if installation is in a mobile
home or if local codes do not permit grounding through a
neutral.
Improper connections of aluminum house wiring to
copper lead can result in property damage, personal
injury or fire. Use only connectors designed for joining
copper to aluminum and follow manufacturers'
recommended procedure closely.
1. With oven positioned in front of cabinet opening,
connect wire leads extending from conduit to junction
box. Verify neutral (white) wire is connected to
appropriate terminal. Check local code to see which
option should be used in grounding unit.
Option 1
Attach oven ground wire (green or bare) to junction box (if
grounded) or a suitable ground.
Option 2
Connect oven ground wire (green or bare) to house
ground feed wire (green, bare, or white). If grounding
through white wire, observe above warning.
W
GRD
A
A—Conduit
W—White neutral wire
GRD—Bare ground wire
Electrical Conduit and Wires
If oven is used in a mobile home or if local codes do not
permit grounding through neutral, open connection and
use grounding lead to ground unit in accordance with local
codes. Connect neutral lead to branch circuit neutral
conductor in usual manner.
2. Connect red and black wires to appropriate house
electrical wiring.
3. Verify wiring by connecting electrical power at fuse
box and checking for proper operation of unit.
• Some interior parts are finished with a protective
coating of oil. When heated for first time oil will burn
off and there will be some odor and smoke.
Place Oven in Wall
This procedure should be performed by 2 people.
1. Seal Openings in wall behind the oven or on floor
under oven. Holes must be sealed before sliding oven
into position.
2. Lift wall oven and slide into cutout.
3. Secure wall oven to cabinet with 4 screws.
Place Oven in Wall
Removal and Replacement of Oven
1. Disconnect power to oven at circuit breaker or fuse
panel.
2. Remove screws securing oven to wall.
3. Remove oven and place oven aside.
4. Disconnect electrical conduit.
5. To reinstall oven, follow instructions in
Installation
section of this manual.