Filter
Top Products
10
TIMER
ON/OFF
CLOCK
STOP
TIME
COOK
TIME
OVEN
CANCEL
CLEAN BROIL
BAKE
CLEAN
BROIL
LOCK
DELAY
OVEN ON
CLEAN
STOP
TIMER
BAKE
888
HR
O
N
Using the Oven Control
OVEN
LIGHT
Flashing Display
When power is connected or
interrupted, oven display flashes.
Press CLOCK to clear display. Clock
may need to be reset.
Making the Numbers
Increase at a Faster Rate
Time increases in larger increments
the longer
+
or pad is held.
Timer Signal
When time elapses, timer
beeps 3 times then approximately
once every 6-8 seconds until
TIMER ON/OFF pad is pressed.
End-of-Cycle Signal
When a timed cooking cycle is
complete, three long signals
sound. End of cycle signal
continues to sound until
OVEN CANCEL pad is pushed.
Setting Electronic Clock
The 12 hour clock does not display AM, PM or military time. When power is
connected or restored, display flashes until pad is pressed.
1. Press CLOCK pad.
• TIME displays in lower left corner
2. Press
+
or pad until correct time-of-day
displays.
3. Press CLOCK pad to set time.
• If CLOCK pad is not pressed, approximately
60 seconds after last entry, TIME disappears
and clock is set
Setting Minute Timer
The timer is a timer only. Electronic timer does not control bake, broil, or
self-clean function. Timer can be set from 5 seconds to 9 hours and 50
minutes.
1. Press TIMER pad.
• TIMER displays in lower left corner
2. Press
+
or pad until desired amount of time
displays.
• Timer begins counting down automatically
after time is entered.
3. Press and hold TIMER pad to cancel timer
signal.
• After time elapses, timer beeps 3 times then
approximately once every 6 to 8 seconds until
TIMER pad is pressed.
Resetting and Canceling Timer
To reset the time when remaining time is displayed PRESS
+
or pad
until desired time displays. To cancel timer when remaining time is
displayed or when signal is beeping, press TIMER ON/OFF pad and hold for
approximately 5 seconds.
CLOCK
TIMER