www.aristonappliance.us
LAVE-VAISSELLE ARISTON -
Notice d’installation
10
Inserting the toe kick
Inside the dishwasher there is a bag containing
the toe kick. Assemble it between the plinth and
the water and power supply attachments.
WARNING
Avoid twisting or flattering the water supply
hose and avoid overlapping the power cables!
Levelling dishwasher
Placing dishwasher
Gently push the dishwasher into the provided
space, as shown in the picture 14
Adjusting the rear feet: using a nut driver 7mm.
turn the red plugs found on the lower part of the
dishwasher until they are at the required height
as shown in the picture below.
Adjusting the front feet: turn them either by
hand or using a 0.51" (13 mm.) spanner wrench
until they are at the required height (see fig. 15).
Note: use the level to verify that the dishwasher
is horizontal.
The dishwasher is at a height of 32.25" (82 cm), to
raise it to 34.5" (87,5 cm.) :
fig. 14
fig. 15
Position the toe kick so that the blunt part is at
the top.
fig. 16
fig. 16a
Fit the toe kick by placing the two oval bumps
labelled A in the eyelets located in the lower
crosspiece of the machine (see fig. 16 and fig.
16a).
Toe Kick
Installation
After fitting the toe kick push upwards to set it
properly as shown in fig. 16a.
A
L