Filter
Top Products
Page - 8 Operator Manual – XR Series Crossovers
Copyright© 2006 – Ashly Audio Inc.
Typical Applications
The following information will help you make the most of your new crossover:
Connecting to a Sound System
Usually, the output signal from a final processing source such as a limiter or equalizer is
fed to a crossover input and each crossover output feeds a power amplifier channel.
Sometimes limiters are used on each crossover output to provide more accurate protection.
Speaker Placement
To obtain maximum benefit from your crossover, a correctly assembled speaker array is a
necessity. Low frequency speakers should be grouped as closely together as possible and mid
and high frequency drivers should be stacked vertically. This arrangement produces a tight
vertical pattern, with wide horizontal dispersion free from high frequency lobing. If possible,
speakers in the array should be arranged so the drivers are equal distance from the listener.
XR 1001 Stereo 2-Way or Mono 3-Way Operation
XR1001
This product functions as either a stereo 2-way or mono 3-way crossover. Mono 3-way is
selected by depressing the MODE switch and using the appropriate connectors and
controls.
Safety Instructions – 3
Introduction – 4
XR Crossovers – 5
Connectors & Cables–5
Physical Description – 6
Installation – 7
Typical Applications – 8
Connecting
Speaker Placement
XR1001 Operation
XR2001 Operation
XR4001 Operation
Troubleshooting - 10
Dimensions - 10
Specifications - 11
Warranty - 12