Filter
Top Products
12 •
••
• Operation Users Manual Electro-Sealer 7112 HF
Security Level Selection
Four levels of security are provided. The display shows the current security level.
To change security levels change the password value using the UP ARROW
and DOWN ARROW keys and pressing the ENTER key. Refer to the
password table (following) for the correct value to enter for the security level
desired. The SEC1 or SEC2 menu items security level may be viewed or changed
at any time regardless of the present security level.
To set the access level to, for example, 2, at the SEC1 menu item press the UP
ARROW key until the upper display shows the password, 1101.
Press the ENTER key. The display will blink, and return with the level value,
2, in the upper display.
The password values shown in the table cannot be altered, so retain a copy of these
pages for future reference. This is the only reference made to password values in
this instruction book.
Password Table
Menu
Security Level
Status
Displayed Value
When Viewed
Password Value
To Enter
Primary
Secondary
Secure
Locked
Locked
Locked
1 1110
Primary
Secondary
Secure
Unlocked
Locked
Locked
2 1101
Primary
Secondary
Secure
Unlocked
Unlocked
Locked
3 1011
Primary
Secondary
Secure
Unlocked
Unlocked
Unlocked
4 111