Filter
Top Products
14 EURORACK PRO RX1202FX User Manual
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)
Fig. 4.3: ¼" stereo plug
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
¼" TRS headphones connector
ring
right signal
tip
left signal
Fig. 4.4: Stereo plug for headphones connection
Specications5.
Mono Inputs
MIC (IMP Invisible Mic Preamp)
Type XLR, electr. balanced
Mic E.I.N. (20 Hz – 20 kHz)
@ 0 Ω source resistance -132 dB / -134 dB A-weighted
@ 50 Ω source resistance -130 dB / -132 dB A-weighted
@ 150 Ω source resistance -128 dB / -130 dB A-weighted
Frequency response <10 Hz – 200 kHz
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio -110 dB / -112 dB A-weighted
Distortion (THD+N) 0.003%, A-weighted
Line In
Type ¼" TRS connector, electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB gain
Stereo Inputs
Type ¼" TRS connector, electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Max. input level +22 dBu
Insert
Type ¼" TRS connector (Tip=Send, Ring=Return)
Auxiliary Inputs
CD/TAPE IN
Type RCA connectors, unbalanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
Aux Return
Type ¼" TRS connector, balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Max. input level +22 dBu