Filter
Top Products
15 EURORACK PRO RX1202FX User Manual
Outputs
AUX SENDS (FX)
Type ¼" TRS connector, impedance balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
Aux Sends (MON)
Type ¼" TRS connector, impedance balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
Main Out
Type XLR connectors, balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +28 dBu balanced
+22 dBu unbalanced
Ctrl Out
Type ¼" TRS connector, impedance balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
Cd/Tape Out
Type RCA connectors, unbalanced
Impedance approx. 1 kΩ
Max. output level +22 dBu
Phones
Type ¼" TRS connector
Max. output level +19 dBu / 150 Ω (316 mW)
EQ
Low 100 Hz / ±15 dB
High 12 kHz / ±15 dB
Main Mix System Data
1
Noise
Main mix @ -∞, -98 dB / -101 dB A-weighted
Channel fader -∞
Main mix @ 0 dB, -85 dB / -88 dB A-weighted
Channel fader -∞
Main mix @ 0 dB, -77 dB / -80 dB A-weighted
Channel fader @ 0 dB
Fade Attenuation
2
(Crosstalk attenuation)
Main fader closed 90 dB
Channel fader closed 90 dB
Frequency Response
Microphone input to Main Out
<20 Hz – 105 kHz +1 dB / -1 dB
<10 Hz – 170 kHz +3 dB / -3 dB
Eects Section
Converter 24-bit Sigma-Delta
Frequency rate 40 kHz
Presets 100
Power Supply
Power consumption 18 W
Voltage 100 – 240 V~, 50/60 Hz
Fuse 100 – 240 V~: T 1.6 A H 250 V
Mains connection IEC (power) cable
Dimensions/Weight
Dimensions (H x W x D) approx. 5 ⁄ x 19 x 5 ⁄"
approx. 133 x 482 x 150 mm
Weight (net) approx. 6.4 lbs / 2.9 kg
Measuring conditions:
1: 20 Hz – 20 kHz; measured at main output. Channels1 – 8 gain @ unity; EQ flat; all channels on main mix;
channels 1/3/5/7 leftmost, channels 2/4/6/8 rightmost. Reference = +6 dBu.
2: 1 kHz relative to 0 dBu; 20 Hz – 20 kHz; line input; main output; gain @ unity.