Filter
Top Products
Using Your Main Oven
The main oven may be controlled by the programmer (see
The Programmer/Clock for details).
The programmer, if fitted, must be set to manual before it
can be used, or programmed.
Switching on the fanned oven
● Use the main oven control to turn your oven on, and
select your temperature.
● Your appliance may be fitted with a thermostat indica-
tor light. If it is, then this will come on to show that
the oven is heating, and once the temperature is
achieved, it will go out.
● To switch off the main oven, simply turn the control
knob back to the ‘● ‘ position.
● The cooling fan will come on during use, and may
continue to run for some time afterwards.
Switching on the multifunction oven
● Use the function control knob to select the function you
wish to use - see the functions table for details.
Note: You can change function during cooking if you
wish, as long as the oven is in manual mode.
● Turn the temperature control knob to the temperature
you wish to use.
● Your appliance may be fitted with a thermostat indica-
tor light. If it is, then this will come on to show that
the oven is heating, and once the temperature is
achieved, it will go out.
● To switch off the main oven, simply turn the control
knob back to the ‘● ‘ position.
● The cooling fan will come on during use, and may con-
tinue to run for some time afterwards.
Important: Never
place food, or dishes on
the base of the main
oven, the element is
here and it will cause
over heating.
i
12