Filter
Top Products
Through your clock you will be able to set the time
of day
and
set the minute minder.
The programmer buttons (push button timer)
There are three buttons on this type of timer. The table
below shows you what their symbols look like, depending on
the model type, and what they do.
Setting the time of day (push button timer)
● Press the Plus and Minus buttons together for a few
seconds, and release.
● The ‘●’ in between the numbers on the LED Display will
begin to flash.
● While the ‘●’ is flashing it is possible to adjust the time
using the Plus and Minus buttons.
● Important - Once the time has been set, allow
approximately 30 seconds before using any of
the other timer functions. This ensures that the time
will remain correct.
Wait until the clock has finished flashing before attempt-
ing to use other functions of the clock
Symbol Symbol What is it?
-
Down / Minus
Used to decrease cook / end time, remove
minutes from the minute minder and adjust
the time of day.
Also for listening to and setting the alarm
tone. There are 3 tones to choose from.
+
Up / Plus
Used to increase cook / end time, add minutes
to the minute minder and adjust the time of
day.
Function button
Used to select the functions available on this
timer.
Press once for: Minute Minder.
Using The Programmer/Clock
A
Automatic
symbol
Cook Pot
Minute Minder
symbol
A
This is a 24 hour clock.
Before you do anything
with your appliance -
you must set the cor-
rect time of day.
i
What your timer symbols
mean.
7