Filter
Top Products
WARNING
Do not touch the heating element! It is very
hot and will burn you.
11. Remove the kettle from the frame. You
must remove it from the rear.
12. Pour any shortening remaining in the kettle
into a metal container. If it is too heavy or
awkward for you to lift by yourself, get
someone to help you.
WARNING
Thoroughly clean and dry the floor if
shortening, water, or other materials are
spilled. Materials spilled on the floor may
cause serious injury and loss of life.
13. Scrape out any residue and discard it.
14. Wash the kettle, the cube melter, and the
filter frame with warm, soapy water.
15. Dry all the parts completely. The kettle and
all other parts must be completely dry before
you use the EZ Melt again.
WARNING
Moisture on parts causes hot shortening to
spatter, which may cause serious injury.
16. Re-assemble the EZ Melt.
Belshaw Bros., Inc. 1750 22
nd
Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322-
5425
EZ Melt Model EZ18, EZ24, EZ34 MN-1316EN 11