Filter
Top Products
Belshaw Bros., Inc. • 1750 22
nd
Ave. S. • Seattle, WA 98144 • Phone 206-322-5474 • Fax 206-322-5425
Thermoglaze 50 MN-1716EN 5
Assembly 4
Clean all parts with mild soap and water and
let dry before assembly and applying
electrical power to the equipment.
The Thermoglaze unit is design for ease of
assembly and use. The system is crated in a
manner so there are few pieces to put together
once the Thermoglaze is in place for production.
After unpacking the system per the uncrating
instructions, 2 items need to be placed on the
Thermoglaze to finish assembly, the glaze trough
and the heat shield. First, the Glaze trough slips
into the 2 holes on either side of the drain tray
with the waterfall headed toward the oven. See
figure 4-1 and 4-4 for help setting the trough in
place. After the trough is in place attach the glaze
hose to the trough by pushing it in the hose
mount in the center of the trough. Second is the
Heat Shield over the oven portion of the
Thermoglaze. Slip it over the oven using the
handles provided until the guard locks over the
back of the oven. See figure 4-1 for a photo of
the location of the heat shield.
To help familiarize you with your Thermoglaze,
please study the following photographs:
Figure 4-1 Front view: