Filter
Top Products
11
EN
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
Important :
The multi-purpose products setting enables you to deactivate the rinsing and salt warning
lights only on
H
0
and “Multi-purpose products”.
• Loading the multi-purpose tablet dispenser
To assist in loading the detergent, the distributor is situated on the front of the upper basket. It is
compatible with all the products recommended for dishwashers.
• Place the tablet
in the external compartment (Fig 04 on previous page) or, for optimum
results, pull out the distributor’s drawer and lay the tablet inside
(Fig 05 on previous page).
- Close the dispenser.
• FOR MULTI-PURPOSE PRODUCTS (
Water hardness less than at 25°F)
• Your appliance automatically adapts to using multipurpose products when
the water hardness is less than 25°F.
TTeessttiinngg ssttrriipp
HHaarrddnneessss
0-10°F 10-18°F 18-25°F
MMuullttii--ppuurrppoossee
pprroodduuccttss FFuunnccttiioonn DDeeaaccttiivvaatteedd
MMuullttii--ppuurrppoossee
pprroodduuccttss SSppaarrkklliinngg CClleeaann
MMuullttii--ppuurrppoossee
pprroodduuccttss
EExxttrraa DDrryy
H0
H0
H0
HI
HI
HI
H2
H2
H2
• Proceed to set the water softener
—
This feature is adjusted using the “S
ET” ; button; hold down this button to access the menu. Then
press once to set the softener level.
—
The softener level is then shown on the screen from
HH00
to
HH66
. The default level is
HH44
..
— In order to use multi-function tablets, you need to adjust the setting. To do this, the button seve-
ral times until you have selected
HH00
or
HHII
or
HH22
depending on the water hardness.
• Proceed to set the “Multi-prupose products ” function (optional)
— Hold down the “SET” button until the “Multi-purpose products” light flashes, then press the selec-
tion button
.
— (Light unlit) : deactivates the “Multi-purpose products” option.
—
(Light flashing)
: corresponds to activation of the “Multi-purpose products” function with the
setting for
““SSppaarrkklliinngg CClleeaann””
.
This enables you to prioritise a brilliant finish for your crockery.
—
(Light permanently lit) : corresponds to activation of the “
Multi-purpose products
” function with
the setting for “Extra Dry”.
““EExxttrraa ddrryy””
enhances the drying results if performance is reduced.
— The setting is validated automatically after 10 seconds if the
“
SET
”
button in not pressed again.
— The “Multi-purpose products ” light then illuminates permanently if this option has been
selected.