Filter
Top Products
29
EN
15/
INDICATIONS FOR THE TESTING LABORATORIES
ENERGY EFFICIENCY TESTS ACCORDING TO AS/NZS 2007 PROGRAMME :
— Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 standard place settings
— Arrangement of the items - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Figs. A-B-C;
IIEECC
load (next
page)
— Loading as per the indications on next page, without side shelves
or stemmed glass support, and 5 cup/saucer supports
(4 for 13 saucers & 1 for 2 cups)
— Setting for upper basket - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Low position
— Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31.25 g of detergent
— Setting for rinsing product distributor - - - - - - - - - - - - - - - - - - 2
— The water softener must be set to 0-10°F
instructions in the paragraph on “Adjusting the water softener”.
— Door ajar 100 mm upon completion of dry test.
For more information on the comparison tests in accordance with AS/NZS 2007, please contact
the manufacturer of the machine before commencing testing.
NNBB::
When conducting tests using a multi-function tablet:
- Check that the water softener is correctly set for the water hardness (Chapter 5 / DETERGENT
PRODUCTS AND ADJUSTING THE WATER SOFTENER • FOR MULTI-FUNCTION PRODUCTS)
- Pull out the detergent distribution drawer and place the tablet in the interior compartment.
45°C