Filter
Top Products
EN
12
16. Re-fit the upper hinge on the
opposite side by using a flat headed
screwdriver. (15)
17. Fit front top panel plastic hinge
covers on the opposite sides. (16)
18. Remove the handle cover gently
taking care not to damage the
appliance.(17)
19. Unscrew and remove the handle
(18). Do not unscrew the yellow
coloured screws!
20. Rotate 180 degrees and fit handle
to the other side after removing hole
plugs gently.(19,20)
21. Fit the handle cover.(21)
22. Adjust the two front feet if
necessary.
23. Check that door opens and closes
easily, it is aligned correctly and there
are no gaps allowing air into the
cabinet. If here are gaps between the
door seal and the cabinet, adjust the
door seal by gently pulling away from
the door using fingers.
24. Check that all the hinge screws are
tightened. Avoid over tightening the
screws.
25. Put all items, fittings back in the
appliance.
26. Wait for at least 4 hours to allow
the system to settle before switching
on.
27. Once the correct storage
temperatures have been reached in
the appliance, put back all the food.