Filter
Top Products
EN
17
6 Maintenance and cleaning
** We recommend that you switch
off the appliance at the socket outlet
and pull out the mains plug before
cleaning.
** Never use any sharp abrasive
instrument, soap, household cleaner,
detergent and wax polish for cleaning.
** Use luke warm water to clean the
cabinet of the appliance and wipe it
dry.
** Use a damp cloth wrung out
in a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe it
dry.
** Make sure that no water enters the
temperature control box.
** If the larder refrigerator is not going
to be used for a long period of time
switch it off, remove all food, clean it
and leave the door ajar.
** Any dust that gathers on the
condenser, which is located at the
back of the appliance, should be
removed once a year with a vacuum
cleaner.
** Check door seals regularly to ensure
they are clean and free from food
particles.
** Removal of door rack :
** To remove a door rack, remove all
the contents and then simply push the
door tray upwards from the base.
** Make sure that the special plastic
container (drain tray) at the back of
the appliance which collects defrost
water is clean at all times. If you want
to remove the tray to clean it follow the
instructions below :
• Switch off at the socket outlet and
pull out the mains plug.
• Push the lug down with the tip of
a screw driver & pull out firmly.
• Clean the drain tray and wipe it
dry.
• Reassemble reversing the
sequence and operations.
** Removal of Zero Degree
Compartment Drawer:
Pull it out as far as possible and then
lift up and remove it completely.
Should the light fail to work switch off
at the socket outlet and pull out the
mains plug.
Use a cross headed screw driver to
remove the light diffuser cover.
Then ensure the bulb is screwed in
until it is secure in the bulb holder.
Replace the plug and switch on.
If the bulb functions, reassemble by
reversing the above procedure, ensure
the top cover is in place.