Bonavita BV3825BO5D Hot Beverage Maker User Manual


 
IMPORTANT
SAFEGUARDS
This appliance is for household use
only. When using electrical appliances,
basic safety precautions should
always be followed to avoid res,
electric shocks, burns, or other injuries
and damage. Read these operating
and safety instructions carefully. Call
our toll-free customer service number
for information on examination, repair,
and adjustments; do not attempt to
repair the appliance yourself.
Read all instructions
Do not touch hot surfaces - use
the handles or knobs.
To protect against re, electric
shock and injury to persons do
not immerse cord, plugs or the
appliance in water or other liquids.
Close supervision is necessary
when any appliance is used by or
near children.
Allow to cool before putting on
or taking off parts, and before
cleaning the appliance.
Do not operate any appliance with
a damaged cord or plug or after
the appliance malfunctions, or has
been damaged in any manner.
Return appliance to the nearest
authorized service facility for
examination, repair or adjustment.
The use of accessory
attachments is not recommended
by the appliance manufacturer
and may result in re, electrical
shock or personal injury.
Do not use outdoors or in damp
areas.
Do not let the cord hang over the
edge of a table or counter, or
touch hot surfaces.
Do not place appliance on or near
a hot electric or gas burner, or in a
heated oven.
To disconnect the appliance, turn
any control to off, then remove
plug from the wall outlet.
Do not use this appliance for
anything other than its intended
use.
Additional Safeguards
Do not operate appliance if power
cord shows any damage or if
appliance works intermittently.
Do not turn on kettle when the
lid is off. The lid must be on the
kettle in the proper orientation
during operation to engage the
boil dry mechanism. If the lid is
not on the kettle, the kettle may
boil dry, causing damage.
SAVE THESE INSTRUCTIONS
Always attach plug to appliance
first, then plug cord into wall
outlet. Always plug appliance in
before turning on.