Filter
Top Products
USING THE
KETTLE
Before rst use
1. Remove packaging materials,
labels, and stickers from the
kettle.
2. Read the KETTLE SET UP AND
OPERATION section.
3. Clean the kettle by lling with
clear, cold water to the MAX line.
4. Turn on the kettle and bring to a
boil.
5. Let the kettle cool down 1 minute.
6. Empty water from kettle.
7. Repeat steps 3-6 two more times
before using.
Kettle Set up and Operation
1. Set the kettle on a at, even and
steady surface.
2. Take off the lid, and ll the kettle
with cold water (Fig. A), up to the
MAX line.
3. After lling the kettle with water,
place the lid on the kettle, and
close rmly. Make sure lid is
secured in the proper orientation
(Fig. B).
4. Before plugging the kettle into
the wall outlet, check that the
electrical circuit is not overloaded
with other appliances.
5. Plug the power cord into a
standard wall outlet (Fig. C).
6. Turn on the I/O switch (Fig. D).
The power indicator light will
illuminate.
A
B