Filter
Top Products
SAVE THESE INSTRUCTIONS
• To avoid circuit overload, do not
operate another high wattage
appliance on the same circuit.
• Do not use the kettle to heat
anything other than water.
• Do not ll above the max
indication. If the kettle is over
lled, boiling water may be
ejected.
• Be aware of steam being emitted
from spout or lid especially during
relling.
• Scalding may occur if the lid is
removed during the heating cycle.
• Never leave the appliance
unattended when in use.
• Do not insert any object into slots
or holes of the kettle.
• Unplug from outlet when not in
use, moving kettle, and before
cleaning.
• If the kettle sustains a heavy
impact, it may be damaged.
Check for cracks or damage
before using, especially if there
are signs of leakage.
• The kettle is very hot during use.
Do not touch kettle surface.
(Fig. 1)
•
This appliance was set at the
factory to be operated at 120V.
Refer to the voltage selector
section of this manual for
conversion to 220-240V.
• Be sure the dual voltage selector
is in the correct voltage position
before operating.
• Before plugging in, read the
information about the dual voltage
selector contained in the voltage
selector section of this manual.
Power Cords
1.
A short detachable
power-
supply cord
is provided to
reduce the risks resulting from
becoming entangled in or
tripping over a longer cord.
2. Longer detachable power-supply
cords or extension cords may be
used if care is exercised in their
use.
1
• Kettle must be operated on a at
surface.