Filter
Top Products
Operation - Cooktop
English 22
Lighting the Burner during a Power
Failure
Cooktop burners can be lit manually during a power failure. Hold a match at the
port and turn the knob to the HI position. Wait until the flame is burning all the
way around the burner before adjusting the flame to the desired setting.
Setting the Flame Size After lighting, turn the knob counterclockwise to the desired flame size. See
“Cooking Guide” on page 30 for recommended burner settings.
CAUTION:
To prevent possible burns, the flame should not extend beyond the
edge of the cookware. This instruction is based on safety consider-
ations. Damage to the cookware or the appliance may also result.
Turning the Burner off Turn knob clockwise to the OFF position.
Note:
A “pop” may be heard when the burner is turned off. The “pop” may
be louder with LP gas than with natural gas. This is normal.