Filter
Top Products
Installation
Install2screwsthroughholesintrimandinrangebackwall.SeeFigure9: Back-
wallTrimStripandFigure10:InstallBackwallTrim_rip
Backwall
Trim Strip
Figure 9: Backwall Trim Strip
j.
. Back of Range
\
Figure 10: Install Backwall Trim Strip
Connect Electric
There are two possible electrical connections:
1. Four wire range cord
2. Three wire range cord
The four wire range cord connection is the recommended method, but where local
codes permit, three wire connections are also acceptable.
Note:
In Canada, the range is shipped from the factory with the range cord
already installed. Continue to "Connect Gas Supply" on page 16
For installations other than those in Canada, connect the range cord at the termi-
nal block (See next page for detailed instructions). Access the terminal block by
removing the cover in the lower right hand corner of the range back panel.
English 11