Filter
Top Products
Once the dough hook is in place, check to make
sure it is fully inserted and then rotate the arm to
the down position by pressing the release button
and lowering the arm.
Place the antiĆsplash cover on the bowl. The cover
has an integral filling funnel. The cover may be reĆ
moved to add ingredients, but the cover should be
in place whenever the power unit isĂin operation.
The antiĆsplash cover serves to prevent the escape
of flourdust at the beginning of the stirring and
kneading process, and also serves to prevent acciĆ
dental contact with the moving dough hook.
Make sure that the power unit is on aĂsmooth, clean,
suitable work surface and switched to off position, O/
Off." Pull out the electrical cord to the necessary length
and plug into a convenient outlet. The mixing bowl with
dough hook is now ready for operation.
Sample recipes may be found in the recipe section, at
the back of this manual.
4a. Depress release button.
4b. Lift arm up.
4c. Place bowl.
4d. Insert dough hook/deflector