Filter
Top Products
21
The coffee temperature can be set with this function.
q Hold down button
% on display for at least
3 seconds.
q Select TEMP. with < or >.
q Press button % until the display flashes.
q Change the setting with < or >.
q Press button % to save the setting.
q Press the & button. Back to standby.
The current time is programmed with this function.
This is required when using the timer function.
The time is displayed in 24h mode.
q Hold down button % on display for at least
3 seconds.
q Select TIME with < or >.
q Press button %- hours display flashes.
q Change the setting with < or>.
q Press button %- minutes display flashes.
q Change the setting with < or >.
q Press button % to save the setting.
q Press the & button. Back to standby.
The set time will be deleted
- if the mains plug is pulled out,
- if the appliance is switched off with the power
switch 1,
- if there is a power failure.
The current time must be set again.
This function is used to set the time at which the
appliance automatically switches on.
q Hold down button % on display for at least 3
seconds.
q Select ON AT with < or>.
q Press button %, hours display flashes.
q Change the setting with < or >.
q Press button %, minutes display flashes.
q Change the setting with < or >.
q Press button % to save the setting.
q Press the & button. Back to standby.
Temperature
TEMP.
normal
TEMP.
high
TEMP.
MAXIMUM
Current time
TIME
--:--
TIME
14:39
Timer
ON AT
--:--
ON AT
07:45