Filter
Top Products
30
q Rinse out the water tank, fill with fresh water up
to max and reĆinsert.
q Empty the receptacle and place back under the
nozzle.
q Set function selector to 0.
Note: The appliance is automatically rinsed. Water
flows atĂintervals into the receptacle. Wait for the next
display on display (approx. 4 minutes).
q Set function selector to
z.
Note: The appliance is automatically rinsed. Water
flows at intervals into the tray 24. Wait for the next
display on display (approx. 4 minutes).
q Empty tray 24 and coffee dregs tray 23.
q Clean and dry contacts 26.
q ReĆinsert tray 24 and coffee dregs tray 23.
q Wipe splashes off the nozzle and appliance.
Note: The appliance is automatically rinsed.
The descaling process is complete. The illuminated
ring on 4 descaling goes out. The appliance is
ready for use again.
The descaling program requires a specific water
temperature before it can start. If the water
temperature isĂtoo high, drain hot water first!
q Place a suitable receptacle under the nozzle.
q Set function selector to 0.
Water runs into the receptacle.
q Set function selector to z.
The required temperature has been reached.
The descaling process can start.
ADD
WATER
TURN ON
WATER
UNIT DE-
SCALING
TURN ON
COFFEE
UNIT DE-
SCALING
EMPTY
TRAYS
CLEAN
CONTACTS
UNIT IS
RINSING
COFFEE
Draining hot water
SYSTEM
TOO HOT