Filter
Top Products
27
d CAUTION d
Clean the nozzle after each use.
q Place a suitable receptacle under the nozzle.
q Briefly set function selector to 0.
d WARNING d
Risk of scalding!
When the function selector is set
to 0, the nozzle may spurt slightly.
Escaping water is very hot. Do not
touch nozzle or direct at people!
q Set function selector to z.
q Wipe the outside of the nozzle after it has cooled
down.
q Dismantle the nozzle to clean thoroughly.
Proceed as follows:
q Unscrew the nozzle with a coin.
q In particular, clean the tip of the nozzle with
a brush and pointed implement.
q Clean all parts with hot water and detergent,
rinse and dry (dishwasherĆproof).
Cleaning the nozzle