Bravetti K5309H Microwave Oven User Manual


 
10
Operating Instructions
Note: If needed, press the “Start/+30SEC” button to add
an additional 30 seconds of cooking time once cooking
has commenced. You may press this button more than
once to increase the time by 30 second increments.
Note: If you want to check the temperature during the
cooking cycle, press the “Convection” button once and
the digital display will show you the selected temperature.
4. When cooking is complete, the microwave will beep 5
times to signal that it is finished.
Important: If stopping cooking process prematurely,
press the “Stop/Clear” button to clear the display and
reset the system before starting another cooking session.
Tips for Convection Cooking
1. Do not cover the glass turntable or any other
container with aluminum foil. It interferes with the
flow of air that cooks the food.
2. Round pizza pans are excellent cooking utensils for
many convection-only items.
3. When baking cakes, cookies, breads, rolls or other
baked foods, most recipes call for preheating.
Preheat the oven just as you do a regular oven.
4. All heatproof cookware can be used in convection
cooking.
5. Always use oven gloves when removing food and
cookware from the oven.
6. Do not use lightweight plastic containers or paper
products during any convection cooking cycle.
Defrosting
Defrost by Weight
1. Remove frozen food from packaging and place on
glass turntable plate. Close microwave door.
2. Press “Defrost by Weight”, and the digital display
will show the microwave and defrost symbols , and
dEF1”. (Fig. 7)
3. Press the number buttons on the control panel to set
the defrosting weight within the range of 4 to 100 oz.
4. Ensure that door is closed securely and press the
Start/+30SEC” button to start the defrosting process.
The defrosting time will begin to count down
immediately.
Note: If you would like to temporarily stop the defrosting
process, press the “Stop/Clear” button on the control
panel once to stop it and then press the “Start /+30SEC
button to restart the defrosting process.
Fig. 7
You can also stop the defrosting process by opening the
door. To restart the defrosting process, close the door
and press the “Start/+30SEC button.
If you want to cancel a defrosting process, press the
Stop/Clear” button twice to cancel.
Note: If needed, press the “Start/+30SEC” button to add
an additional 30 seconds of defrosting time once cooking
has commenced. You may press this button more than
once to increase the time by 30 second increments.
4. When defrosting is complete, the microwave will beep
5 times to signal that it is finished.
Important: If stopping defrosting process prematurely,
press the “Stop/Clear” button to clear the display and
reset the system before starting another cooking session.
Defrost by Time
1. Remove frozen food from packaging and place on
glass turntable plate. Close microwave door.
2. Press “Defrost by Time”, and the digital display will
show the microwave and defrost symbols, and
dEF2”. (Fig. 8)
3. Press the number buttons on the control panel to set
the desired defrosting time (up to a maximum cooking
time of 99 minutes and 99 seconds).
4. Ensure that door is closed securely and press the
Start/+30SEC” button to start the defrosting process.
The defrosting time will begin to count down
immediately.
Note: If you would like to temporarily stop the defrosting
process, press the “Stop/Clear” button on the control
panel once to stop it and then press the “Start /+30SEC
button to restart the defrosting process.
You can also stop the defrosting process by opening the
door. To restart the defrosting process, close the door
and press the “Start/+30SEC button.
If you want to cancel a defrosting process, press the
Stop/Clear” button twice to cancel.
Note: If needed, press the “Start/+30SEC” button to add
an additional 30 seconds of defrosting time once cooking
has commenced. You may press this button more than
once to increase the time by 30 second increments.
4. When defrosting is complete, the microwave will beep
5 times to signal that it is finished.
Important: If stopping cooking process prematurely,
press the “Stop/Clear” button to clear the display and
reset the system before starting another cooking session.
Fig. 8