Filter
Top Products
Operating Instructions
Note: If you would like to temporarily stop the cooking
process, press the “Stop/Clear” button on the control panel
once to stop it and then press the “Start /+30SEC” button to
restart the cooking process.
You can also stop the cooking process by opening the door.
To restart the cooking process, close the door and press
the “Start/+30 Sec.” button.
If you want to cancel a cooking process, press the
“Stop/Clear” button twice.
Note: If needed, press the “Start/+30SEC” button to add
an additional 30 seconds of cooking time once cooking has
commenced. Press the “Start/+30SEC” more than once for
more than 30 seconds.
2. When cooking is complete, the microwave will beep 5
times to signal that it is finished.
Important: If stopping cooking process prematurely, press
the “Stop/Clear” button to clear the display and reset the
system before starting another cooking session.
Memory
Use this feature to save a cooking program with up to two
stages of cooking. You can save up to three different
memory programs. To use this feature:
1. Press the “Memory” button once and the digital
display will show the number “1”.
2. Set one or two stages of cooking (for two stages of
cooking follow the directions for “Muti-Stage
Cooking”).
3. Once finished having entered the cooking stages,
press the “Memory” button to confirm and save.
Repeat the previous steps in order to save two other
cooking programs (for step 1 you would press it twice for
the second saved program or three times for the third saved
program). When wanting to use one of the three saved
programs, press the memory button until you have selected
the correct one (“1”, “2”, or “3”), and then press the
“Start/+30SEC” button.
Auto-Menu
There are nine different auto-menu buttons. Each button is
pre-set for temperature and given weights, and when using
the auto-menu buttons there is no need to set the time
because it is already pre-determined. To use these auto-
menu functions:
1. Press the one of the nine auto-menu buttons. All
auto-menu buttons can be pressed up to three times
in order to match the actual weight of the food with the
pre-set weights (see table on following page).
2. Press the “Start/+30SEC” button to start the cooking
process. The cooking time will begin to countdown
immediately.
Multi-Stage Cooking
11
Multi-Stage cooking is a useful feature when the need
for two different stages or levels of cooking are needed.
This oven can be programmed for up to 2 stages of
cooking. For example, cooking with 100% microwave
power for 5 minutes, and then 70% microwave power for
10 minutes:
1. Press “Microwave” once to select power level of
100% (“P100” will shown on the digital display
indicating that the oven at 100% power).
2. Press the number buttons on the control panel to set
the desired cooking time for 5 minutes by pressing
“5”–“0”–“0”.
3. Press “Microwave” four times to select power level of
70% (“P70” will shown on the digital display indicating
that the oven at 70% power).
4. Press the number buttons on the control panel to set
the desired cooking time for 10 minutes by pressing
“1”-“0”-“0”–“0”.
5. Ensure that door is closed securely and press the
“Start/+30SEC” button to start the cooking process.
The cooking time will begin to count down
immediately.
Important: The oven will beep once after the first stage
of cooking, and then the second stage will begin.
Note: If you would like to temporarily stop the cooking
process, press the “Stop/Clear” button on the control
panel once to stop it and then press the “Start /+30SEC”
button to restart the cooking process.
You can also stop the cooking process by opening the
door. To restart the cooking process, close the door and
press the “Start/+30SEC” button.
If you want to cancel a cooking process, press the
“Stop/Clear” button twice to cancel.
Note: If needed, press the “Start/+30SEC” button to add
an additional 30 seconds of cooking time once cooking
has commenced. You may press this button more than
once to increase the time by 30 second increments.
4. When cooking is complete, the microwave will beep 5
times to signal that it is finished.
Important: If stopping cooking process prematurely,
press the “Stop/Clear” button to clear the display and
reset the system before starting another cooking session.
Express Cooking
Cooking at 100% power level can be achieved quickly
and easily by using the express cooking method. The
numbers “1”to “6” on the control panel act as quick-start
cooking times in minutes (i.e. number “1” is one minute,
“2” is two minutes, etc). To use the express cooking
function:
1. Press on one of the numbers “1” through “6” and the
cooking process and time count down will begin
immediately.