Breville BBL600XL Blender User Manual


 
Warranty
19
One year limited warranty
Breville®* warrants this Breville® appliance against
defects that are due to faulty material or
workmanship for a period of (1) year from the date
cited on the original purchase receipt.This warranty
does not cover damage from abuse, neglect, use for
commercial purposes, or any other use not found in
the printed “Instructions for use” booklet. Should the
consumer choose to tamper with, or intentionally
dismantle the product, the Warranty will automatically
be deemed void.There is no warranty for glass parts,
glass containers, filter basket, blades and agitators.
HWI Breville® expressly disclaim all responsibility for
consequential damages for incidental losses caused
by use of this appliance. Some states or provinces do
not allow this exclusion or limitation for incidental or
consequential losses, so the foregoing disclaimer
may not apply to you.
ANY WARRANTY OF MERCHANTABILITY OR FITNESS
WITH RESPECT TO THIS PRODUCT IS ALSO LIMITED
TO THE ONE YEAR LIMITED WARRANTY PERIOD.
Some states or provinces do not allow disclaimer of
the implied warranty with respect to consumer
goods, so the foregoing disclaimer may not apply
to you.
This warranty gives you specific legal rights and you
may also have other legal rights which vary from
state to state or province to province.
If this appliance should become defective within the
warranty period, do not return the appliance to the
store. Please contact our Customer Service Center.
Toll free phone number:
1-866- BREVILLE (1-866-273-8455)
Internet email:
AskUs@BrevilleUSA.com
AskUs@BrevilleUSA.ca (in Canada)
ORGINAL RECEIPT IS REQUIRED FOR ALL RETURNS
*HWI Breville® products are distributed in Canada by
Anglo Canadian Housewares, L.P. and in USA by
Metro/Thebe Inc.
Trouble shooting
Trouble shooting chart
18
Problem Solution
Motor doesn’t start or blade doesn’t rotate Check that the power plug is securely inserted into
the power outlet and switched on.
Check that the blender jug and lid are securely
locked into position.
Check that the ‘Power’ button and selected function
or speed setting is illuminated.
Be sure to press only one speed or function button
at a time.
Food is unevenly chopped Either too much food is being chopped at one time or
the pieces are not small enough.Try cutting food into
smaller pieces of even size and processing a smaller
amount per batch. For best results the food should be
chopped into pieces no larger than
3
/
4
inch (2cm).
Food is chopped too fine or is watery The food is over processed.Use brief pulses or process
for a shorter time.
Food sticks to blade Processing too much food.Turn the blender off by pressing the
‘Power’ button on the control panel.Then switch off at the power
outlet and unplug the power cord.When the blade stops rotating,
remove the blender lid and remove some food with a spatula.
Ice is not chopping to desired consistency The actual condition of the ice cubes will impact the end consistency.
Use larger, solid dry ice on Snow/Speed 1 to create a snow
Use any type of ice on ‘ICECRUSH’ when coarser chopped ice
is required.
Function LEDs start to flash and keys do not respond The motor is being overloaded .Unplug the blender from the mains
and let it cool down for 30 minutes or longer.