Breville BBL600XL Blender User Manual


 
11
Disassembling your blender for cleaning,
care and storage
Step 1.
Always make sure the Breville ikon Hemisphere
Blender is off by pressing the ‘Power’ button on the
control panel.Then unplug the power cord.
Step 2.
Remove the blender pitcher from the motor base
by grabbing the handle and lifting the jug in an
upward direction.
Step 3.
Remove the blade assembly by upturning the blender
jug and twisting the Blade Removal System clockwise,
(see fig 1) then lift upwards and away from the base of
the blender.The circular plastic surround attached to
the base of the blender jug is not removable.
Step 4.
Remove the silicon seal from the blade assembly
The Breville ikon Hemisphere Blender features a
one piece Blade Removal System for the easy
removal of the blade and jug for cleaning.
Note
Operating your Breville ikon Hemisphere Blender
continued
Step 10.
For ingredients that require short bursts of power,
select the ‘PULSE’ function. The ‘PULSE’ button will
illuminate and remain illuminated while the button is
pushed.When this function is selected, the LCD timer
screen will illuminate and count upwards in one
second increments during pulsing. Press the ‘PULSE’
button in short bursts until blending is complete.
Use the ‘PULSE’ button when the food that is
being processed is too thick or coarse to
circulate within the blender pitcher.
Note
Step 11.
At the end of use, always make sure the Breville ikon
Hemisphere Blender is turned off by pressing the
‘Power’ button on the control panel and then unplug
the cord. Make sure the motor and blades have
completely stopped before attempting to move the
appliance, or when the Breville ikon Hemisphere
Blender is not in use and before disassembling,
cleaning and storing.
• During the blending process, ingredients may
stick to the sides of the blender pitcher.To
push the food back onto the blades, press the
‘Power’ button on the control panel and
remove the power cord. Remove the lid and
use a plastic spatula to scrape down the sides
of the pitcher. Replace the lid before
recommencing blending.
• If any moisture or liquid appears on top of the
motor base during blending, press the ‘Power’
button on the control panel and remove the
power plug. Remove the blender pitcher.Wipe
the motor base immediately with a dry cloth or
paper towel to absorb the liquid. Check that
the blender pitcher is correctly assembled.
Note
The Breville ikon Hemisphere Blender features a
motor overload protection feature. If the motor is
being overloaded, the motor will stop and the
function key LED's will illuminate and flash. To
restart it again, unplug from the mains and let it
cool down for 30 minutes or longer.
Note
10
Fig 1