Filter
Top Products
20
CARE & CLEANING
DISASSEMBLING YOUR BLENDER
FOR CLEANING
Step 1.
Always ensure the Breville Hemisphere
™
Control Blender is off by pressing the
‘Power’ button on the control panel. Then
unplug the power cord.
Step 2.
Remove the blender jug from the motor base
by grasping the handle and lifting the jug in
an upward direction.
Step 3.
Remove the lid and wash as per care and
cleaning instructions.
REASSEMBLING YOUR BLENDER
JUG AFTER CLEANING.
Ensure all parts are clean and completely
dry thoroughly before placing blender jug
onto blender base.
CLEANING THE MOTOR BASE
Wipe the motor base with a soft, damp cloth
then dry thoroughly.
Wipe any excess food particles from the
power cord.
NOTE
Do not use abrasive scouring pads
or cleaners when cleaning the motor
base as they may scratch the surface.
CLEANING THE BLENDER JUG, LID,
AND INNER MEASURING LID
Wash all parts in warm soapy water with a
soft cloth. Use a brush to dislodge stubborn
foods. Rinse and dry thoroughly.
NOTE
Periodically, run a cycle with the jar
filled L with warm soapy water to
help clean in between the
gaskets/washers of the blade
assembly as fruit juices can get in
and act somewhat like an adhesive
which would make the blades difficult
to turn and therefore put extra
pressure and resistance on the motor.
NOTE
Blades are sharp please use care when
cleaning around the blades.
When cleaning the blender jug
it is always a good idea to clean
immediately after use to avoid food
sticking to the blades and jug. Place
1-2 cups of warm soapy water into
the jug with the lid on and inner lid in
place and blend for 5-10 seconds on
a low speed which will help clean the
blades and jug. Then rinse jug in cold
water and dry thoroughly.
The blender lid may be washed in the
dishwasher on the top shelf only and on a
standard wash cycle. The blender jug may be
placed in the bottom shelf of the dishwasher
on a standard cycle only.