Filter
Top Products
7
Before first use
Before assembling your Breville Wizz™ Electronic
Mixer, remove and safely discard any packaging
material and promotional labels.
Ensure the Speed Control Dial is in the ‘OFF’
position and the appliance is switched off at the
power outlet and the power cord is unplugged.
Wash the mixing bowls, beaters and dough hooks
in warm, soapy water with a soft cloth. Rinse and
dry thoroughly.
Mixing bowls may also be washed in the dishwasher.
When first using your Breville Wizz™ Electronic
Mixer, you may notice and odour coming from the
motor. This is normal and will dissipate with use.
Assembling the mixer
1. Place the mixer stand on a level, dry surface
such as a bench top. Ensure the mixer stand is
in the horizontal position.
2. Attach the motor head to the mixer stand by
pressing and holding down the mixer release
lever at the back of the mixer stand. Position the
metal pin on the underside of the motor head to
fit into the groove made when pressing down
the mixer release lever [Fig 1). When the motor
head is in position, release the lever.
Fig 1
Once the motor head is securely locked onto the
mixer stand it can be tilted away from the bowl by
pressing the tilt back locking button and lifting it
back to a 45 degree angle.
Make sure the motor head is securely attached to
the mixer stand before using. The mixer should
not be used as a hand mixer. It must always be
used on the stand.
Attach the revolving turntable
1. Attach the revolving turntable to the mixer
stand by fitting the revolving turntable into the
socket corresponding to the size of the bowl
selected (Fig 2). The turntable should spin
around freely.
Fig 2
Assembly and operation of your Breville Wizz™
Electronic Mixer