Filter
Top Products
12
PAge heAder.....ASSEMBLY & OPERATION
ASSEMBLING THE MIXER
Before using your bench mixer for the
first time, remove any packaging material
and promotional labels. Ensure the speed
control dial is in the OFF position, the mixer
is switched off at the power outlet and the
power cord is unplugged.
Remove the mixing bowl, beater, whisk and
dough hook and wash in warm soapy water
with a soft cloth. Rinse and dry thoroughly.
The bowl and the attachments may be
washed in the dishwasher.
When first using your bench mixer, you may
notice an odour coming from the motor.
This is normal and will dissipate with use.
ATTACHING EITHER THE LARGE OR
SMALL BOWL
The process is the same to insert either the
large or small bowl.
1. To remove or insert the mixing bowl, the
mixer motor head must be raised and
locked into the open position.
2. Place the mixer on a level, dry bench
top. The mixer motor head should be in
the horizontal (closed) position when
moving. Raise the mixer motor head by
pressing the RELEASE button.
3. Lift the mixer motor head up until it tilts
back and locks into the open position.
4. Insert the mixing bowl into the bowl
locking recess of the mixer stand and
turn clockwise until the bowl locks
securely into place.