Breville BEM800 Mixer User Manual


 
17
PAge heAder.....ASSEMBLY & OPERATION
DISASSEMBLING THE MIXER
1. When mixing is complete, turn the
speed control dial to the OFF/STANDBY
position, switch the appliance off at the
power outlet and unplug the cord.
2. To remove splash guard, separate the
pour spout, then slide main ring out of
position.
3. Raise the mixer motor head by pressing
the RELEASE button. Lift the motor
head up until it locks into the open
position.
4. Remove the mixing or whisking tool
by holding the mixer motor head and
pressing the tool upwards on the spindle.
Then turn the attachment anti-clockwise
to release it from the pin on the spindle.
5. Use a soft plastic spatula to remove
mixture from the beater, dough hook or
whisk attachment.
6. Release and remove the mixing bowl
from locking recess on mixer base by
turning anti-clockwise.
7. Use a soft plastic spatula to remove
mixture from the mixing bowl.
8. Lower the mixer motor head by
pressing the RELEASE button and
lowering the mixer motor head down
until it locks into the horizontal
position.
9. When lowering or lifting the mixer,
always support the motor head with your
other hand to prevent from
free-falling.
WARNING
Avoid contact with beater/dough
hook/whisk during operation. Keep
hands, hair, clothing, spatulas and
other utensils out of the way to prevent
personal injury or damage to the mixer.