Breville BEM820 Mixer User Manual


 
14
PAge heAder.....ASSEMBLY & OPERATION
OPERATING THE MIXER
Planetary Mixing Action
By replicating a similar mixing action used
by commercial mixers in bakeries and
patisseries, the Scraper Mixer Pro head
rotates around the bowl while rotating
the beater in the opposite direction. This
ensures a superior and thorough mixing
result without the need for a rotating bowl.
1. Ensure the speed control dial is set to
the OFF position, plug the cord into
a 220–240V power outlet and switch
the power ON at the power outlet. The
illuminated LED speed indicator band
will flash and the count up/down timer
will display 0:00. The mixer is
now ready.
2. Add ingredients to the mixing bowl as
indicated in the recipe.
3. Always begin mixing by selecting a low
speed setting on the speed control dial.
Starting on a low speed will prevent
ingredients splattering. Increase the
speed as suited to the mixing task. The
speed setting can be adjusted during
operation. If necessary, stop the mixer
during operation and scrape any food
mixture down the sides of the mixing
bowl with a spatula.
4. If the mixer has not been used for
5 minutes it will automatically change
from STANDBY mode to a power saving
OFF mode and the illuminated LED will
switch off. To exit OFF mode and begin
mixing, turn the dial to the selected
speed or press one of the count up/down
timer buttons.
5. Do not turn the mixer on with the
scraper beater in place if the mixing
bowl is empty. This will cause the
scraper beater to make a loud noise as it
scrapes the bowl.
6. When ingredients are in the mixing
bowl, the scraper beater may make a
slight noise as it scrapes the sides and
bottom of the bowl. This is normal and
should not cause concern.