Filter
Top Products
Operating your Breville Ikon Grill
continued
8. Use the handle to close the top plate. The top
plate has a floating hinge system that is
designed to press down evenly on the food. The
Grilling Height Control on the right hand side of
the top plate is used to adjust for the thickness
of the food. The top plate must be fully lowered
to achieve grill marks onto the food.
9. When the selected ingredients are grilled, use the
handle to open the top lid. Remove the food
using a plastic spatula.
To use as a sandwich press
1. Insert the plug into a 230/240v power outlet and
switch the power on. The red power ‘On’ light
will illuminate.
2. Ensure the Removable Drip Tray is correctly
inserted and positioned back into the appliance.
3. Ensure the top and bottom plates grill plates are
securely locked into position.
4. Ensure the top plate is in the closed position for
more efficient preheating.
5. Turn the Base Plate Tilt Dial to the Flat position.
6. Turn the variable heat control dial to the
‘Sandwich’ position.
7. Allow the Ikon Grill to preheat until the green
‘READY’ light illuminates.
8. During this time, prepare the sandwich and place
it onto the base cooking plate. Always place
sandwiches towards the rear of the bottom
cooking plate.
9. Close the top cooking plate which has a floating
hinge that is designed to evenly press down on
the sandwich. The top plate must be fully
lowered to cook sandwiches. The Grilling Height
Control on the right hand side of the top plate is
used to adjust for the thickness of the sandwich.
10. Toasting should take approximately 5-8 minutes.
Exact toasting time will be a matter of
preference. It will also depend on the type of
bread and filling used.
The green ‘READY’ light will cycle on and off
during the toasting process indicating that the
correct temperature is being maintained.
Note
11. When the sandwich is cooked, use the handle to
open the top plate. Remove the sandwich using a
plastic spatula. Never use metal tongs or a knife
as these can cause damage to the non-stick
coating of the cooking plates.
Always allow the Ikon Grill to preheat until the
green ‘READY’ light illuminates.
Note
8
ALWAYS ALLOW THE IKON GRILL PLATES TO COOL DOWN BEFORE
RELEASING AND REMOVING.