Filter
Top Products
9
OPERATING YOUR BREVILLE FREEZE & MIX
BEFORE FIRST USE
Remove and safely discard any packaging
material or promotional labels before using
the bowl for the first time.
Wash and dry the bowl thoroughly following
the ‘Care and Cleaning’ instructions in this
booklet.
OPERATING YOUR BREVILLE
FREEZE & MIX
Place the freezer bowl into your freezer for
a minimum of 15 hours prior to making ice
cream. When freezing your bowl, ensure that
it is placed in the coolest part of the freezer.
Adjust your freezer so that it is at the coldest
setting. Then place the freezer bowl in the
freezer for a minimum of 15 hours, prior to
making ice cream, this will give you a faster
and better end result.
NOTE
The Freezer bowl must be frozen for
a minimum of 15 hours to ensure that
the correct consistency of ice cream
can be made.
PREPARE INGREDIENTS
Prepare the mixture and the ingredients to be
used to make the ice cream or frozen desert.
NOTE
It is important to prepare all
ingredients before removing the
freezer bowl from the freezer. This will
prevent the freezer bowl from thawing.
NOTE
If the mixture being used has been
heated, ensure it has been completely
cooled before placing it into the
freezer bowl.
NOTE
Make sure your ice cream mixture
has been refrigerated for 1-2 hours,
if recipes require heating then chill
mixture for 2-4 hours or overnight
if time permits before churning/
freezing. This will maintain that you
achieve consistent quality ice cream
results every time.
ATTACHING THE BOWL
1. Place the bench mixer base on a level,
dry surface such as a bench top. The
mixer motor head should be in the
horizontal (closed) position. Raise the
mixer motor head by depressing the tilt
back hinge button located on the back of
the mixer motor head.
Lift the mixer motor head up until it tilts
back and locks into the open position.