Filter
Top Products
WarrTroubleshooting
continued
26
One yea
Breville
®
*
defects tha
workmans
date of ori
does not c
commercia
the printed
warranty f
basket, bla
disclaims a
for inciden
Some stat
or limitatio
the forego
ANY WARR
WITH RESP
TO THE ON
Some stat
of the imp
goods, so
to you.
This warra
may also h
state to sta
Possible problem Easy solution
Brewer dispenses a
partial cup
The time is not displayed
on the LCD screen
Brewer shuts off or turns
on automatically
The blue light in the
water tank is flashing
• The Exit Needle may be clogged (refer to Cleaning the K-Cup
®
Holder,
page 22).
• The Water Tank may have been removed during brewing. Replace the
Water Tank and perform a cleansing brew without a K-Cup
®
(refer to Brewing Hot Water, page 15).
• If the LCD screen indicates ‘DESCALE’, follow the instructions, Descaling
your Brewer (page 23)
• If you have repeated the descale procedure on your Brewer two times
and the message is still displayed, contact Customer Service on
1-866-BREVILLE (1-866-273-8455).
• The time will not be displayed on the LCD screen unless you have set it.
To set the clock, follow the instructions, Setting the ‘CLOCK SET’ feature
(page 17).
• If power is interrupted to the Brewer, you will need to set the clock again.
• Check to make sure that the ‘ON-OFF TIME’ and/or the ‘AUTO OFF’
features have not been set. To do this, press the ‘MENU’ button and scroll
through the programming options. Both the ‘ON-OFF TIME’ and ‘AUTO
OFF’ features should be ‘INACTIVE‘. If ‘INACTIVE’ is not displayed, follow
the instructions, Setting the ‘ON-OFF TIME’ feature (page 17) and Setting
the ‘AUTO OFF’ feature (page 19).
• The water level is low and a full cup cannot be brewed. Add water to
the Water Tank, following the instructions, Re-filling the Water Tank
(page 15).
BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 26