Filter
Top Products
8 9
OPERATING
your new Breville Gourmet Single Cup Brewer™
OPERATING YOUR BREVILLE GOURMET SINGLE CUP BREWER™
INSTALLING THE WATER FILTER
For the best tasting gourmet coffee, tea
or hot cocoa, Breville recommends using
bottled or filtered water.
The Water Filter provided with the Brewer
can significantly reduce substances that
affect the smell and taste of water such as
free chlorine, certain pesticides and organic
impurities as well as traces of heavy metals.
NOTE:
The Water Filter can be removed
from the Brewer.
If you choose to install the Water
Filter, it is recommended to replace
the filter every 2 months or 60 tank
refills, more often if you have
hard water.
We recommend removing the Water
Filter if using filtered water, or if you
choose not to replace the Water
Filter every 2 months, as the filter
may clog and affect the smell and
taste of the water.
If you choose not to install the Water
Filter, you are ready to start the
One-time Priming Process (page 10).
NOTE:
Do not use water that has been
treated by a 'water softener'. The
increase in sodium levels in the
water can cause scaling in the
brewer and hinder its performance.
Follow these steps each time you install a
new Water Filter to ensure it filters optimally.
1. Remove the Water Tank from the Brewer
by gripping the handle located on the left
side of the Water Tank, then lift upwards.
2. Remove the Water Tank Lid.
3. Rinse the Water Tank with fresh water
and replace back onto the Brewer.
4. Remove the Upper and Lower Filter
Holder and Water Filter from the
polybag. Unwrap the Water Filter from
its protective plastic.
5. Soak the Water Filter for 5 minutes then
rinse for 30 seconds. It is normal to see
a grey residue after soaking the filter.
6. Wash the Lower Filter Holder, ensuring
the stainless steel mesh is free of residue.
7. Insert the Water Filter into the Upper
Filter Holder, then attach the Lower Filter
Holder so it locks into place.