Breville the Juice Fountain Duo Juicer User Manual


 
13
PAge heAder.....
ASSEMBLING YOUR BREVILLE PRODUCT
FOR USE WITH PUREE DISC
Place the motor base on a flat dry surface
such as a counter top. Ensure that the motor
base is turned OFF at the control panel and
the power cord is unplugged.
1. Place the Filter Bowl Surround on the
top of the Motor Base.
2. Place the Puree Disc into the Filter Bowl
Surround and onto the Motor Drive
Coupling Push down until it clicks into
place. Ensure the Puree Disc is fitted
securely inside the Filter Bowl Surround
and onto the Motor Base.
NOTE
Never use Puree Disc without Puree
Insert. They must always be used
together.
3. Place the Puree Insert into the Filter
Bowl Surround, making sure the warning
label on the handle is facing upwards.
4. Place the Juicer Cover over the Puree
Insert and Filter Bowl Surround and
lower into position.
5. Raise the safety locking arm up and lock
into the two grooves on either side of
the juicer cover. The safety locking arm
should now be in a vertical position and
locked into place on top of the juicer
cover.